User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HP 5340A:Frequency Counter(CP14-026)
DATE:                  19-Sep-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       36
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.004  DISP         Allow UUT a 1 hour warm-up.
  1.004  DISP         Connect the Mieco 1402 REFRENCE OUTPUT to the 8673C
  1.004  DISP         FREQ STANDARD EXT input and set the 8673C INT/EXT
  1.004  DISP         switch to the EXT position.
  1.005  DISP         Connect the 8673C 10 MHz OUT to the 3325A EXT REF IN
  1.005  DISP         connector.
  1.005  DISP         Set the UUT front panel controls as follows:
  1.005  DISP         RESOLUTION ..................... 1Hz
  1.005  DISP         SAMPLE RATE .................... fully ccw
  1.005  DISP         RANGE switch ................... 10Hz-250MHz
  1.005  DISP         INT-EXT switch ................. INT (rear panel)
  1.006  CALL         HP 5340A Sub1
  1.007  CALL         HP 5340A Sub2
  1.008  CALL         HP 5340A Sub3
  1.009  HEAD
  1.010  DISP         Set the UUT rear panel controls as follows:
  1.010  DISP         INT-EXT switch ................. INT
  1.011  HEAD         {}
  1.012  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.012  DISP         {º THIS COMPLETES THE VERIFICATION º}
  1.012  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.013  END